SonicWALL TZ 180 Humidifier User Manual


 
VPN > Settings
552
SonicOS Enhanced 4.0 Administrator Guide
“Creating Site-to-Site VPN Policies” section on page 562
“VPN Auto-Added Access Rule Control” section on page 578
Configuring GroupVPN Policies
SonicWALL GroupVPN facilitates the set up and deployment of multiple SonicWALL Global
VPN Clients by the SonicWALL security appliance administrator. GroupVPN is only available
for SonicWALL Global VPN Clients and it is recommended you use XAUTH/RADIUS or third
party certificates in conjunction with the Group VPNfor added security.
For more information on the SonicWALL Global VPN Client, see the SonicWALL Global VPN
Client Administrator’s Guide. For more information on the SonicWALL Global Security Client,
see the SonicWALL Global Security Client Administrator’s Guide.
The default GroupVPN configuration allows you to support SonicWALL Global VPN Clients
without any further editing of the VPN policy, except to check the Enable box for GroupVPN in
the VPN Policies table.
SonicWALL supports four GroupVPN policies. You can create GroupVPN policies for the DMZ,
LAN, WAN, and WLAN zones. These GroupVPN policies are listed in the VPN policies tables
as WAN Group VPN, LAN GroupVPN, DMZ GroupVPN, and WLAN GroupVPN. For these
GroupVPN policies, you can choose from IKE using Preshared Secret or IKE using 3rd Party
Certificates for your IPsec Keying Mode.
Tip You can easily create GroupVPN policies using the VPN Policy Wizard. For complete step-
by-step instructions on using the VPN Policy Wizard, see Chapter 51 Configuring VPNs with
the SonicWALL VPN Policy Wizard.
Note See the GroupVPN Setup in SonicOS Enhanced technote on the SonicWALL
documentation Web site
http://www.sonicwall.com for more GroupVPN configuration
information.
SonicOS supports the creation and management of IPsec VPNs.