Filter
Top Products
VPN > Settings
564
SonicOS Enhanced 4.0 Administrator Guide
Optionally, specify a Local IKE ID (optional) and Peer IKE ID (optional) for this Policy. By
default, the IP Address (ID_IPv4_ADDR) is used for Main Mode negotiations, and the
SonicWALL Identifier (ID_USER_FQDN) is used for Aggressive Mode.
Step 7 Click the Network tab.
Step 8 Under Local Networks, select a local network from Choose local network from list if a
specific local network can access the VPN tunnel. If hosts on this side of the VPN connection
will be obtaining their addressing from a DHCP server on the remote side of the tunnel, select
Local network obtains IP addresses using DHCP through this VPN tunnel. If traffic can
originate from any local network, select Any Address. Use this option if a peer has Use this
VPN tunnel as default route for all Internet traffic selected.
Note DHCP over VPN is not supported with IKEv2.
Step 9 Under Destination Networks, select Use this VPN Tunnel as default route for all Internet
traffic if traffic from any local user cannot leave the SonicWALL security appliance unless it is
encrypted. You can only configure one SA to use this setting. If the remote side of this VPN
connection is be obtaining its addressing from a DHCP server on this side of the tunnel, select