Filter
Top Products
Wireless > Settings
331
SonicOS Enhanced 4.0 Administrator Guide
Wireless Bridge VPN Policy Configuration
The Wireless Bridge VPN Policy is configured as follows:
Step 1 Click VPN, then Configure.
Step 2 Select IKE using Preshared Secret from the IPsec Keying Mode menu.
Step 3 Enter a name for the SA in the Name field.
Step 4 Type the IP address of the Access Point in the IPsec Gateway field. In our example network,
the IP address is 172.16.31.1.
Step 5 Select Use this VPN Tunnel as default route for all Internet traffic from the Destination
Networks section.
Click OK to close the window, and then click Apply for the settings to take effect on the security
appliance.