Configuring Interfaces
158
SonicOS Enhanced 4.0 Administrator Guide
• SonicPoint Limit: The maximum number of allowed SonicPoints is configured
automatically.
• Comment: Optionally enter a comment about the subnet.
• Management: Select the appropriate protocols to allow remote mangement of the
SonicWALL security appliance from this subnet.
• User Login: Select HTTP and/or HTTPS to allow users with limited management rights to
log in to the SonicWALL security appliance.
• Add rule to enable redirect from HTTP to HTTPS: If you select HTTPS but do not select
HTTP for either Management or User Login, select this option to redirect HTTP users to
HTTPS.
• Create default DHCP Lease Scope: Select to create a DHCP lease scope for this subnet.
The DHCP lease scope consists of the IP addresses that are reserved for users who
connect to the VAP associated with this WLAN subnet. This option is enabled by default.
To configure additional options for the DHCP lease scope (such as the number of IP
addresses and the lease time), go to the Network > DHCP Server page, locate the lease
scope in the DHCP Server Lease Scope table, and click on the Configure icon. See
“Network > DHCP Server” section on page 277 for more information.
Step 3 Optionally, you can enable multicast reception on the subnet by clicking on the Advanced tab
and selecting the Enable multicast support checkbox.
Step 4 Click OK.