Filter
Top Products
WWAN
382
SonicOS Enhanced 4.0 Administrator Guide
3. Select the Service Provider that you have created an account with. Note that only service
providers supported in the country you selected are displayed.
4. In the Plan Type window, select the WWAN plan you have subscribed to with the service
provider. If your specific plan type is listed in the pulldown menu, the rest of the fields in the
General tab are automatically provisioned. Verify that these fields are correct and click on
the Parameters tab.
5. If your Plan Type is not listed in the pulldown menu, select Other.
6. Enter a name for the WWAN profile in the Profile Name field.
7. Verify that the appropriate Connection Type is selected. Note that this field is
automatically provisioned for most service providers.
8. Verify that the Dialed Number is correct. Note that the dialed number is *99# for most
Service Providers.
9. Enter your username and password in the User Name, User Password, and Confirm User
Password fields, respectively.
10. Enter the Access Point Name in the APN field. APNs are required only by GPRS devices
and will be provided by the service provider.
11. Click on the Parameters tab.
12. In the Dial Type pulldown menu, select whether the connection profile is a Persistent
Connection, Dial on Data, or Manual Dial.
For a detailed explanation of how the different Dial Types operate when the WAN
Connection Types is set for Ethernet with WWAN Failover see
“Understanding WWAN
Failover” on page 373.
Note To configure the SonicWALL TZ 190 for remotely triggered dial-out, the Dial Type must be
Dial on Data. See
“Configuring WWAN Advanced Settings” on page 380 for more
information.