Filter
Top Products
Log > View
768
SonicOS Enhanced 4.0 Administrator Guide
Source interface AND Destination interface
Step 3 Check the Group box next to any two or more criteria to combine them with a logical OR.
For example, if you enter values for Source IP, Destination IP, and Protocol, and check
Group next to Source IP and Destination IP, the search string will look for connections
matching:
(Source IP OR Destination IP) AND Protocol
Step 4 Click Apply Filter to apply the filter immediately to the Active Connections table. Click Reset
to clear the filter and display the unfiltered results again.
The following example filters for log events resulting from traffic from the WAN to the LAN:
Log Event Messages
For a complete reference guide of log event messages, refer to the SonicWALL Log Event
Reference Guide located at http://www.sonicwall.com/us/support/230_3611.html.