Filter
Top Products
Network > WAN Failover & Load Balancing
184
SonicOS Enhanced 4.0 Administrator Guide
Activating WAN Failover and Selecting the Load Balancing Method
To configure the SonicWALL for WAN failover and load balancing, follow the steps below:
Step 1 On Network > WAN Failover & LB page, select Enable Load Balancing.
Step 2 If there are multiple possible secondary WAN interfaces, select an interface from the
Secondary WAN Interface.
Step 3 Select a load balancing method. By default, the SonicWALL will select Basic Active/Passive
Failover as the method, but there are four load balancing methods available: