Filter
Top Products
Wizards > Setup Wizard
805
SonicOS Enhanced 4.0 Administrator Guide
Configuring NAT Enabled with PPPoE
NAT with PPPoE Client is a network protocol that uses Point to Point Protocol over Ethernet
to connect with a remote site using various Remote Access Service products. This protocol is
typically found when using a DSL modem with an ISP requiring a user name and password to
log into the remote server. The ISP may then allow you to obtain an IP address automatically
or give you a specific IP address.
1. Click the Setup Wizard button on the Network > Settings page.
2. Read the instructions on the Welcome window and click Next to continue.