Filter
Top Products
System > Packet Capture
111
SonicOS Enhanced 4.0 Administrator Guide
About the Packet Detail Window
When you click on a packet in the Captured Packets window, the packet header fields are
displayed in the Packet Detail window. The display will vary depending on the type of packet
that you select.
About the Hex Dump Window
When you click on a packet in the Captured Packets window, the packet data is displayed in
hexadecimal and ASCII format in the Hex Dump window. The hex format is shown on the left
side of the window, with the corresponding ASCII characters displayed to the right for each line.
When the hex value is zero, the ASCII value is displayed as a dot.
Configuring Packet Capture
You can access the packet capture tool on the System > Packet Capture page of the SonicOS
UI. There are five main areas of configuration for the packet capture tool. The following sections
describe the configuration options, and provide procedures for accessing and configuring
packet capture:
• “Configuring General Settings” on page 112
• “Configuring Capture Filter Settings” on page 112
• “Configuring Display Filter Settings” on page 115
• “Configuring Logging Settings” on page 117