Filter
Top Products
Network > NAT Policies
258
SonicOS Enhanced 4.0 Administrator Guide
Figure 21:1 One-to-Many NAT Load Balancing Topology and Configuration
To configure One-to-Many NAT load balancing, first go to the Firewall > Access Rules page
and choose the policy for WAN to LAN. Click on the Add… button to bring up the pop-up
access policy screen. When the pop-up appears, enter in the following values:
• Action: Allow
• Service: HTTPS
• Source: Any
• Destination: WAN Primary IP
• Users Allowed: All
• Schedule: Always on
• Comment: Descriptive text, such as SSLVPN LB
• Logging: Checked
• Allow Fragmented Packets: Unchecked
Next, create the following NAT policy by selecting Network > NAT Policies and clicking on the
Add... button:
• Original Source: Any
• Translated Source: Original
• Original Destination: WAN Primary IP
• Translated Destination: Select Create new address object... to bring up the Add
Address Object screen.
–
Name: A descriptive name, such as mySSLVPN
–
Zone assignment: LAN
–
Type: Host