Filter
Top Products
70 CHAPTER 4: ADDRESS TABLE COMMANDS
show bridge
multicast
address-table
The show bridge multicast address-table Privileged EXEC mode
command displays multicast MAC address or IP address table
information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address
mac-multicast-address | ip-multicast-address] [format ip | format mac]
Parameters
■ vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value.
■ mac-multicast-address — A valid MAC multicast address.
■ ip-multicast-address — A valid IP multicast address.
■ format ip / mac — Multicast address format. Can be ip or mac. If the
format is unspecified, the default is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it is in the range of
0100.5e00.0000-0100.5e7f.ffff.
Example
In this example, multicast MAC address and IP address table information
is displayed.
Console#
show bridge multicast address-table
Vlan MAC Address Type Ports
---- -------------- ------- ----------
1 01:00:5e:02:02
:03
static g1, g2