Filter
Top Products
474 CHAPTER 34: 802.1X COMMANDS
quiet state following a failed authentication exchange (for example, the
client provided an invalid password). To restore the default configuration,
use the no form of this command.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
Parameters
■ seconds — Specifies the time in seconds that the device remains in the
quiet state following a failed authentication exchange with the client.
(Range: 0-65535 seconds)
Default Configuration
Quiet period is 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
During the quiet period, the device does not accept or initiate
authentication requests.
The default value of this command should only be changed to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients and authentication servers.
To provide a faster response time to the user, a smaller number than the
default value should be entered.
Example
The following example sets the number of seconds that the device
remains in the quiet state following a failed authentication exchange to
3600.
Console(config)#
interface ethernet
g16
Console(config-if)#
dot1x timeout quiet-period
3600