Filter
Top Products
384 CHAPTER 26: WEB SERVER COMMANDS
no ip http port
Parameters
■ port-number — Port number for use by the HTTP server. (Range:
1-65535)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the
device.
Example
The following example configures the http port number to 100.
ip http
exec-timeout
The ip http exec-timeout Global Configuration mode command sets
the interval, which the system waits to user input in http sessions before
automatic logoff. To restore the default configuration, use the no form of
this command.
Syntax
ip http exec-timeout minutes [seconds]
no ip http exec-timeout
Parameters
■ minutes — Integer that specifies the number of minutes. (Range:
0-65535)
■ seconds — Additional time intervals in seconds. (Range: 0-59)
Default Configuration
There is no default configuration for this command.
Console(config)# ip http port 100