Filter
Top Products
276 CHAPTER 17: RADIUS COMMAND
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
■ deadtime — Length of time in minutes during which a RADIUS server
is skipped over by transaction requests. (Range: 0-2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets all RADIUS server deadtimes to 10 minutes.
show radius-servers The show radius-servers Privileged EXEC mode command displays the
RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config)# radius-server deadtime 10