Filter
Top Products
tacacs-server timeout 397
server. This key must match the encryption used on the TACACS+
daemon. (Range: 0-128 characters)
Default Configuration
Empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication encryption key for all
TACACS+ servers.
tacacs-server
timeout
The tacacs-server timeout Global Configuration mode command sets
the interval during which the device waits for a TACACS+ server to reply.
To restore the default configuration, use the no form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
Parameters
■ timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Console(config)#
tacacs-server key
enterprise