Filter
Top Products
qos map dscp-queue 139
Parameters
■ dscp- list — Specifies up to 8 DSCP values separated by a space.
(Range: 0-63)
■ dscp-mark-down — Specifies the DSCP value to mark down. (Range:
0-63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP
value is mapped to the same DSCP value.
Command Mode
Global Configuration mode.
User Guidelines
DSCP values 3,11,19… cannot be remapped to other values.
Example
The following example marks down incoming DSCP value 3 as DSCP
value 43 on the policed-DSCP map.
qos map
dscp-queue
The qos map dscp-queue Global Configuration mode command
modifies the DSCP to CoS map. To restore the default map, use the no
form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
Parameters
■ dscp-list — Specifies up to 8 DSCP values separated by a space.
(Range: 0 - 63)
■ queue-id — Specifies the queue number to which the DSCP values are
mapped.
Console(config)#
qos map policed-dscp
3
to
43
Reserved DSCP. DSCP 3 was not configured.