Filter
Top Products
100 CHAPTER 6: LINE COMMANDS
Syntax
speed bps
Parameters
■ bps — Baud rate in bits per second (bps). Possible values are 2400,
4800, 9600, 19200, 38400, 57600 and 115200.
Default Configuration
The default speed is 19200 bps.
Command Mode
Line Configuration (console) mode
User Guidelines
This command is available only on the line console.
The configured speed is applied when Autobaud is disabled. This
configuration applies only to the current session.
Example
The following example configures the line baud rate.
autobaud The autobaud Line Configuration mode command sets the line for
automatic baud rate detection (autobaud). To disable automatic baud
rate detection, use the no form of the command.
Syntax
autobaud
no autobaud
Default Configuration
Autobaud is disabled.
Command Mode
Line Configuration (console) mode
Console(config)#
line console
Console(config-line)#
speed
115200