Filter
Top Products
354 CHAPTER 24: WIRELESS AP GENERAL COMMANDS
Command Mode
Global Configuration mode
User Guidelines
Only active APs can be placed in AP Configuration mode.
Example
The following example sets the device in AP Configuration mode.
name The name AP Configuration mode command configures a wireless AP
name. To restore the default configuration, use the no form of this
command.
Syntax
name string
no name
Parameters
■ name — The AP name.
Default Configuration
The AP’s MAC address.
Command Mode
AP Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures a wireless AP name to ‘enterprise’ .
Console (Config)# wlan ap CR1 config
Console (Config-wlan-ap)#
Console (Config)# wlan ap CR1 config
Console (Config-ap)#
name
enterprise