Filter
Top Products
service-policy 127
User Guidelines
Policing uses a token bucket algorithm. CIR represents the speed with
which the token is removed from the bucket. CBS represents the depth of
the bucket.
Example
The following example defines a policer for classified traffic. When the
traffic rate exceeds 124,000 bps or the normal burst size exceeds 96000
bps, the packet is dropped. The class is called ‘class1’ and is in a policy
map called ‘policy1’.
service-policy The service-policy Interface Configuration (Ethernet, port-Channel)
mode command applies a policy map to the input of a particular
interface. To detach a policy map from an interface, use the no form of
this command.
Syntax
service-policy {input policy-map-name}
no service-policy {input}
Parameters
■ policy-map-name — Specifies the name of the policy map to be
applied to the input interface.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-Channel) mode
User Guidelines
Only one policy map per interface per direction is supported.
Console (config)#
policy-map
policy1
Console (config-pmap)#
class
class1
Console (config-pmap-c)#
police
124000 9600
exceed-action drop