Filter
Top Products
dot1x timeout server-timeout 477
Parameters
■ seconds — Time in seconds that the device waits for a response to an
EAP-request frame from the client before resending the request.
(Range: 1-65535 seconds)
Default Configuration
Default timeout period is 30 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The default value of this command should be changed only to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients. and authentication servers
Example
The following example sets the timeout period before retransmitting an
EAP-request frame to the client to 3600 seconds.
dot1x timeout
server-timeout
The dot1x timeout server-timeout Interface Configuration mode
command sets the time that the device waits for a response from the
authentication server. To restore the default configuration, use the no
form of this command.
Syntax
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameters
■ seconds — Time in seconds that the device waits for a response from
the authentication server.
(Range: 1-65535 seconds)
Default Configuration
Console(config)# interface ethernet g16
Console(config-if)
#
dot1x timeout supp-timeout
3600