Filter
Top Products
show authentication methods 35
Syntax
ip https authentication method1 [method2...]
no ip https authentication
Parameters
■ method1 [method2...] — Specify at least one method from the
following list:
Default Configuration
The local user database is checked. This has the same effect as the
command ip https authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify none as the final
method in the command line.
Example
The following example configures HTTPS authentication.
show
authentication
methods
The show authentication methods Privileged EXEC mode command
displays information about the authentication methods.
Syntax
show authentication methods
Keyword Source or Destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.
Console(config)#
ip https authentication radius tacacs local
none