Filter
Top Products
vlan allowed 357
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the Interface Configuration mode.
vlan allowed The vlan allowed AP interface Ethernet Configuration mode command
adds or removes VLANs to the Ethernet port of a wireless AP. To restore
the default configuration, use the no form of this command.
Syntax
vlan allowed {add vlan-list | remove vlan-list}
no vlan allowed
Parameters
■ add vlan-list — List of VLAN IDs to add. Separate nonconsecutive
VLAN IDs with a comma and no spaces; use a hyphen to designate a
range of IDs.
■ remove vlan-list — List of VLAN IDs to remove. Separate
nonconsecutive VLAN IDs with a comma and no spaces; use a hyphen
to designate a range of IDs.
Default Configuration
VLAN number 1.
Command Mode
AP interface Ethernet Configuration mode
User Guidelines
A VLAN cannot be removed from the allowed VLANs if it is defined as a
native VLAN.
Example
Console (Config-ap)# interface ethernet
Console (Config-ap-if)#