Filter
Top Products
spanning-tree hello-time 211
Default Configuration
The default forwarding time for the IEEE Spanning Tree Protocol (STP) is
15 seconds.
Command Modes
Global Configuration mode
User Guidelines
When configuring the forwarding time, the following relationship should
be kept:
2*(Forward-Time - 1) >= Max-Age
Example
The following example configures the spanning tree bridge forwarding
time to 25 seconds.
spanning-tree
hello-time
The spanning-tree hello-time Global Configuration mode command
configures the spanning tree bridge hello time, which is how often the
device broadcasts hello messages to other devices.To restore the default
configuration, use the no form of this command.
Syntax
spanning-tree hello-time seconds
no spanning-tree hello-time
Parameters
■ seconds — Time in seconds. (Range: 1-10)
Default Configuration
The default hello time for IEEE Spanning Tree Protocol (STP) is 2 seconds.
Command Modes
Global Configuration mode
User Guidelines
Console(config)# spanning-tree forward-time 25