Filter
Top Products
snmp-server location 297
The following example configures the system contact point called
3Com_Technical_Support.
snmp-server
location
The snmp-server location Global Configuration mode command
configures the system location string. To remove the location string, use
the no form of this command.
Syntax
snmp-server location text
no snmp-server location
Parameters
■ text — Specifies a string that describes system location information.
(Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces
inside quotation marks.
Example
The following example defines the device location as New_York.
snmp-server set The snmp-server set Global Configuration mode command defines the
SNMP MIB value.
Syntax
snmp-server set variable-name name1 value1 [ name2 value2 …]
console(config)# snmp-server contact 3Com_Technical_Support
Console(config)# snmp-server location New_York