Filter
Top Products
ip name-server 315
ip name-server The ip name-server Global Configuration mode command defines the
available name servers. To remove a name server, use the no form of this
command.
Syntax
ip name-server server-address [server-address2 … server-address8]
no ip name-server [server-address1 … server-address8]
Parameters
■ server-address — Specifies IP addresses of the name server.
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they
were entered.
Up to 8 servers can be defined using one command or using multiple
commands.
Example
The following example sets the available name server.
Console(config)#
ip name-server
176.16.1.18