Filter
Top Products
show wlan rogue-aps list 327
■ name — Specify the AP name. (Range: 1-32 characters)
■ mac-address — Specify the AP MAC address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about rogue APs detection
configuration.
show wlan
rogue-aps list
The show wlan rogue-aps list Privileged EXEC mode command displays
information about potential rogue APs.
Syntax
show wlan rogue-aps list [mac mac-address]
Console#
show wlan rogue-aps configuration
Rogue APs detection is enabled.
AP name Radio Scanning Interval
----------- -------- -------- -------------
AP1 a Enabled Long
AP1 g Enabled Long
AP2 a Enabled Long
AP2 g Enabled Long