Filter
Top Products
190 CHAPTER 12: IGMP SNOOPING COMMANDS
Syntax
show ip igmp snooping mrouter [interface vlan-id]
Parameters
■ vlan-id — Specifies the VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays multicast device interfaces in VLAN 1000.
show ip igmp
snooping interface
The show ip igmp snooping interface Privileged EXEC mode
command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
Console#
show ip igmp snooping mrouter interface
1000
VLAN Ports
---- -----
1000 g1
Detected multicast devices that are forbidden statically:
VLAN Ports
---- -----
1000 g19