Filter
Top Products
398 CHAPTER 27: TACACS+ COMMANDS
Example
The following example sets the timeout value to 30 for all TACACS+
servers.
tacacs-server
source-ip
The tacacs-server source-ip Global Configuration mode command
configures the source IP address to be used for communication with
TACACS+ servers. To restore the default configuration, use the no form
of this command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
Parameters
■ source — Specifies the source IP address.
Default Configuration
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the source IP address for all TACACS+
servers.
Console(config)#
tacacs-server timeout
30
Console(config)#
tacacs-server source-ip
172.16.8.1