Filter
Top Products
32 CHAPTER 2: AAA COMMANDS
The following example sets the enable password for authentication when
accessing higher privilege levels.
login
authentication
The login authentication Line Configuration mode command specifies
the login authentication method list for a remote telnet or console. To
restore the default configuration specified by the aaa authentication
login command, use the no form of this command.
Syntax
Login authentication {default | list-name}
no login authentication
Parameters
❥
■ default — Uses the default list created with the aaa authentication
login command.
■ list-name — Uses the indicated list created with the aaa
authentication login command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
To change (or rename) an authentication method, use the negate
command and create a new rule with the new method name.
Example
The following example specifies the default authentication method for a
console.
Console(config)#
aaa authentication enable default enable
Console(config)#
line console
Console(config-line)#
login authentication default