Filter
Top Products
show management access-list 321
Parameters
■ console-only — Indicates that the device can be managed only from
the console.
■ name — Specifies the name of the access list to be used. (Range: 1-32
characters)
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access list called ‘mlist’ as the
management access list.
show management
access-list
The show management access-list Privileged EXEC mode command
displays management access lists.
Syntax
show management access-list [name]
Parameters
■ name — Specifies the name of a management access list. (Range:
1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Console(config)#
management access-class
mlist