Filter
Top Products
274 CHAPTER 17: RADIUS COMMAND
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software
searches all RADIUS server hosts to 5 times.
radius-server
source-ip
The radius-server source-ip Global Configuration mode command
specifies the source IP address used for communication with RADIUS
servers. To restore the default configuration, use the no form of this
command.
Syntax
radius-server source-ip source
no radius-source-ip source
Parameters
■ source — Specifies a valid source IP address.
Default Configuration
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
console(config)# radius-server retransmit 5