3Com 3CRUS2475 Plumbing Product User Manual


 
clear spanning-tree detected-protocols 219
flooding — Flood BPDU packets when the spanning tree is disabled
on an interface.
Default Configuration
The default setting is flooding.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines BPDU packet flooding when the
spanning-tree is disabled on an interface.
clear spanning-tree
detected-protocols
The clear spanning-tree detected-protocols Privileged EXEC mode
command restarts the protocol migration process (forces renegotiation
with neighboring devices) on all interfaces or on a specified interface.
Syntax
clear spanning-tree detected-protocols [ethernet interface |
port-channel port-channel-number]
Parameters
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Console(config)# spanning-tree bpdu flooding