Filter
Top Products
29
WIRELESS AP BSS COMMANDS
bss The bss Interface Radio Configuration mode command adds or removes
ESS to/from a radio interface.
Syntax
bss {add {ess-index | ssid} | remove {ess-index | ssid}}
Parameters
■ ess-index — The ESS index. (Range: 1-65535)
■ ssid — The SSID string of the ESS. (Range: 1-32 characters)
Default Configuration
The default ESS is automatically added to the radio interface.
Command Mode
AP Interface Radio Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds an ESS to a radio interface called ‘enterprise’.
bss enable The bss enable Interface Radio Configuration mode command places
the device in BSS configuration mode.
Config#
wlan ap CR1 config
Console (Config-ap)#
interface radio 802.11g
Console (Config-ap-radio-if)#
bss
add
enterprise