Filter
Top Products
show ip igmp snooping groups 191
Parameters
■ vlan-id — Specifies the VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays IGMP snooping information on VLAN
1000.
show ip igmp
snooping groups
The show ip igmp snooping groups Privileged EXEC mode command
displays multicast groups learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan vlan-id] [address
ip-multicast-address]
Parameters
■ vlan-id — Specifies the VLAN number.
■ ip-multicast-address — Specifies the IP multicast address.
Default Configuration
This command has no default configuration.
Console#
show ip igmp snooping interface
4
IGMP Snooping is globaly disabled
IGMP Snooping is enabled on VLAN 4
IGMP host timeout is 260 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 10 sec
IGMP mrouter timeout is 300 sec
Automatic learning of multicast router ports is enabled