Filter
Top Products
spanning-tree mst configuration 223
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the MSTP instance 1 path cost for
Ethernet port 9 to 4.
spanning-tree mst
configuration
The spanning-tree mst configuration Global Configuration mode
command enables configuring an MST region by entering the Multiple
Spanning Tree (MST) mode.
Syntax
spanning-tree mst configuration
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
All devices in an MST region must have the same VLAN mapping,
configuration revision number and name.
Example
The following example configures an MST region.
Fast Ethernet (100 Mbps) 200,000 19
Ethernet (10 Mbps) 2,000,000 100
Console(config) #
interface ethernet
9
Console(config-if) #
spanning-tree mst
1
cost
4
Console(config)#
spanning-tree mst configuration
Console(config-mst)#