Filter
Top Products
show bridge address-table static 67
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on ports
with a defined Layer 3 interface) are presented in the VLAN column by a
port number and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically
learned are displayed in the MAC address table. This includes, for
example, MAC addresses defined in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database
are displayed.
show bridge
address-table static
The show bridge address-table static Privileged EXEC mode command
displays statically created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface |
port-channel port-channel-number]
Console#
show bridge address-table
Aging time is 300 sec
interface mac address Port Type
--------- -------------- ---- -------
1 00:60:70:4C:73
:FF
g8 dynamic
1 00:60:70:8C:73
:FF
g8 dynamic
200 00:10:0D:48:37
:FF
g9 static