Filter
Top Products
448 CHAPTER 32: GVRP COMMANDS
gvrp
vlan-creation-forbid
The gvrp vlan-creation-forbid Interface Configuration (Ethernet,
port-channel) mode command disables dynamic VLAN creation or
modification. To enable dynamic VLAN creation or modification, use the
no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
Dynamic VLAN creation or modification is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command forbids dynamic VLAN creation from the interface. The
creation or modification of dynamic VLAN registration entries as a result
of the GVRP exchanges on an interface are restricted only to those VLANs
for which static VLAN registration exists.
Example
The following example disables dynamic VLAN creation on Ethernet port
1.
gvrp
registration-forbid
The gvrp registration-forbid Interface Configuration (Ethernet,
port-channel) mode command deregisters all dynamic VLANs on a port
and prevents VLAN creation or registration on the port. To allow dynamic
registration of VLANs on a port, use the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Console(config)#
interface eth7ernet
1
Console(config-if)#
gvrp vlan-creation-forbid