Filter
Top Products
37
TROUBLESHOOTING
This section describes problems that may arise when installing the device
and how to resolve these issues. This section includes the following
topics:
■ Problem Management — Provides information about problem
management with the devices.
■ Troubleshooting Solutions — Provides a list of troubleshooting
issues and solutions for using the devices.
Problem
Management
Problem management includes isolating and quantifying problems, and
applying solutions.
When a problem is detected, the exact nature of the problem must be
determined. Problem analysis includes how the problem is detected, and
what are its possible causes. With the problem known, the effects of the
problem are recorded, including all known results of the problem. Once
the problem is quantified, theappropriate solution can be applied.
Solutions to common troubleshooting issues are found either in this
document, or can be obtained through Customer Support.
If no solution is found in this document, please contact Customer
Support for advice and instructions.
Troubleshooting
Solutions
Listed below are possible troubleshooting problems and their solutions.
These error messages include:
■ Cannot connect to management using RS-232 serial connection
■ Cannot connect to switch management using Telnet, HTTP, SNMP, etc.
■ Self-test exceeds 15 seconds.
■ No connection is established and the port LED is on.
■ Device is in a reboot loop