Filter
Top Products
24
WIRELESS AP GENERAL
COMMANDS
clear wlan ap The clear wlan ap Privileged EXEC mode command deactivates an AP.
Syntax
clear wlan ap {name | mac-address}
Parameters
■ name — The AP name. (Range: 1-32 characters)
■ mac-address — The AP MAC address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
■ When the configurations of all the deactivated AP is deleted, the AP
may reappear in the AP Discovery Table.
■ The clear wlan ap command can also be used to remove an AP that
is irrelevant (either associated with another device or removed from
the system) from the APs discovery table. If the AP is still relevant (not
associated with another device and not removed from the system), it
should not be removed from the discovery table.
Example
The following example deactivates an AP called enterprise.
Console (config)#
clear wlan ap
enterprise