Filter
Top Products
wrr-queue cos-map 131
Example
The following example applies the aggregate policer called ‘policer’1 to a
class called ‘class1’ in policy map called ‘policy1’.
wrr-queue cos-map The wrr-queue cos-map Global Configuration mode command maps
Class of Service (CoS) values to a specific egress queue. To restore the
default configuration, use the no form of this command.
Syntax
wrr-queue cos-map queue-id cos1...cos8
no wrr-queue cos-map [queue-id]
Parameters
■ queue-id — Specifies the queue number to which the CoS values are
mapped.
■ cos1...cos8 — Specifies CoS values to be mapped to a specific queue.
(Range: 0-7)
Default Configuration
CoS values are mapped to 8 queues as follows:
Cos0 is mapped to queue 3.
Cos1 is mapped to queue 1.
Cos2 is mapped to queue 2.
Cos3 is mapped to queue 4.
Cos4 is mapped to queue 5.
Cos5 is mapped to queue 6.
Cos6 is mapped to queue 7.
Cos7 is mapped to queue 8.
Command Mode
Global Configuration mode
Console(config)#
policy-map
policy1
Console(config-pmap)#
class
class1
Console(config-pmap-c)#
police aggregate
policer1