Filter
Top Products
19
SNMP COMMANDS
snmp-server
community
The snmp-server community Global Configuration mode command
configures the community access string to permit access to the SNMP
protocol. To remove the specified community string, use the no form of
this command.
Syntax
snmp-server community community [ro | rw | su] [ip-address] [view
view-name]
snmp-server community-group community group-name [ip-address]
no snmp-server community community [ip-address]
Parameters
■ community — Community string that acts like a password and permits
access to the SNMP protocol. (Range: 1-20 characters)
■ ro — Indicates read-only access (default).
■ rw — Indicates read-write access.
■ su — Indicates SNMP administrator access.
■ ip-address — Specifies the IP address of the management station.
■ group-name — Specifies the name of a previously defined group. A
group defines the objects available to the community. (Range: 1-30
characters)
■ view-name — Specifies the name of a previously defined view. The
view defines the objects available to the community. (Range: 1-30
characters).