Filter
Top Products
60 CHAPTER 4: ADDRESS TABLE COMMANDS
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list |
port-channel port-channel-number-list}
no bridge multicast forward-all
Parameters
■ add — Force forwarding all multicast packets.
■ remove — Do not force forwarding all multicast packets.
■ interface-list — Separate nonconsecutive Ethernet ports with a
comma and no spaces; a hyphen is used to designate a range of ports.
■ port-channel-number-list — Separates nonconsecutive port-channels
with a comma and no spaces; a hyphen is used to designate a range
of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all multicast packets on port 8 are forwarded.
bridge multicast
forbidden
forward-all
The bridge multicast forbidden forward-all Interface Configuration
(VLAN) mode command forbids a port to be a forward-all-multicast port.
To restore the default configuration, use the no form of this command.
Console(config)#
interface vlan 2
Console(config-if)#
bridge multicast forward-all add
ethernet g8