Filter
Top Products
35
WIRELESS AP RADIO COMMANDS
interface radio The interface radio AP Configuration mode command places the device
in Radio Configuration mode.
Syntax
interface radio {802.11a | 802.11g}
Parameters
■ 802.11a — In accordance with 802.11a protocol.
■ 802.11g — In accordance with 802.11g protocol.
Default Configuration
This command has no default configuration.
Command Mode
AP Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example places the device in the Radio Configuration
mode, complying with the 802.11a protocol.
Console (Config-wlan-ap)#
interface radio 802.11g
Console (C
onfig-ap-radio-if)#