Filter
Top Products
snmp-server host 293
Parameters
■ ip-address — Specifies the IP address of the host (targeted recipient).
■ hostname — Specifies the name of the host. (Range:1-158 characters)
■ community-string — Specifies a password-like community string sent
with the notification operation.
■ (Range: 1-20)
■ traps — Indicates that SNMP traps are sent to this host. If unspecified,
SNMPv2 traps are sent to the host.
■ informs — Indicates that SNMP informs are sent to this host. Not
applicable to SNMPv1.
■ 1 — Indicates that SNMPv1 traps will be used.
■ 2 — Indicates that SNMPv2 traps will be used. If
■ port—Specifies the UDP port of the host to use. If unspecified, the
default UDP port number is 162.
■ (Range:1-65535)
■ filtername — Specifies a string that defines the filter for this host. If
unspecified, nothing is filtered.
(Range: 1-30 characters)
■ seconds — Specifies the number of seconds to wait for an
acknowledgment before resending informs. If unspecified, the default
timeout period is 15 seconds.
(Range: 1-300)
■ retries — Specifies the maximum number of times to resend an
inform request. If unspecified, the default maximum number of
retries is 3. (Range: 0-255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode