Filter
Top Products
snmp-server view 285
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name [oid-tree]
Parameters
■ view-name — Specifies the label for the view record that is being
created or updated. The name is used to reference the record. (Range:
1-30 characters)
■ oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a
text string consisting of numbers, such as 1.3.6.2.4, or a word, such as
system. Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example 1.3.*.4.
■ included — Indicates that the view type is included.
■ excluded — Indicates that the view type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The number of views is limited to 64.
No check is made to determine that a MIB node corresponds to the
"starting portion" of the OID until the first wildcard.
Example
The following example creates a view that includes all objects in the
MIB-II system group except for sysServices (System 7) and all objects for
interface 1 in the MIB-II interface group.
Console(config)#
snmp-server view
user-view system
included
Console(config)#
snmp-server view
user-view system.7
excluded
Console(config)#
snmp-server view
user-view ifEntry.*.1
included