Filter
Top Products
The following example adds a user, to the secadmin user role.
Dell (conf)#username john role secadmin password 0 password
AAA Authentication and Authorization for Roles
This section describes how to configure AAA Authentication and Authorization for Roles.
Configuration Task List for AAA Authentication and Authorization for Roles
This section contains the following AAA Authentication and Authorization for Roles configuration tasks:
• Configuring AAA Authentication for Roles
• Configuring AAA Authorization for Roles
• Configuring TACACS+ and RADIUS VSA Attributes for RBAC
Configure AAA Authentication for Roles
Authentication services verify the user ID and password combination. Users with defined roles and users
with privileges are authenticated with the same mechanism. There are six methods available for
authentication: radius, tacacs+, local, enable, line, and none.
When role-based only AAA authorization is enabled, the enable, line, and none methods are not
available. Each of these three methods allows users to be verified with either a password that is not
specific to their user ID or with no password at all. Because of the lack of security these methods are not
available for role only mode. When the system is in role-only mode, users that have only privilege levels
are denied access to the system because they do not have a role. For information about role only mode,
see Configuring Role-based Only AAA Authorization.
NOTE: Authentication services only validate the user ID and password combination. To determine
which commands are permitted for users, configure authorization. For information about how to
configure authorization for roles, see Configure AAA Authorization for Roles.
To configure AAA authentication, use the aaa authentication command in CONFIGURATION mode.
aaa authentication login {method-list-name | default} method [… method4]
Configure AAA Authorization for Roles
Authorization services determine if the user has permission to use a command in the CLI. Users with only
privilege levels can use commands in privilege-or-role mode (the default) provided their privilege level is
the same or greater than the privilege level of those commands. Users with defined roles can use
commands provided their role is permitted to use those commands. Role inheritance is also used to
determine authorization.
Users with roles and privileges are authorized with the same mechanism. There are six methods available
for authorization: radius, tacacs+, local, enable, line, and none.
When role-based only AAA authorization is enabled, the enable, line, and none methods are not
available. Each of these three methods allows users to be authorized with either a password that is not
specific to their userid or with no password at all. Because of the lack of security, these methods are not
available for role-based only mode.
To configure AAA authorization, use the aaa authorization exec command in CONFIGURATION
mode. The
aaa authorization exec command determines which CLI mode the user will start in for
784
Security