![](http://pdfasset.owneriq.net/f/cc/fcc9359f-ac5c-4c53-a9f4-c13edb8bd0bb/fcc9359f-ac5c-4c53-a9f4-c13edb8bd0bb-bg157.png)
--------------------------------------------------
[ 132] 20::1 00:00:20:d5:ec:a0 Fo 0/16 0 1
[ 132] 20::1 00:00:20:d5:ec:a1 Fo 0/24 0 1
To re-enable programming of IPv6 /128 route prefixes in the LPM table, use the no ipv6 unicast-
host-route command. A warning message states that the change takes effect only when IPv4 or IPv6
route prefixes are cleared from the routing table (RTM) using the clear ip route * command.
Equal Cost Multi-Path (ECMP)
343