• Line-card CPU 2 is LP-2.
• The Control Processor is CP.
Example of a Test Log Report (All Levels) for Control Processor: TestReport-CP.txt
Dell# show file flash://TestReport-CP.txt
DELL DIAGNOSTICS-Z9500-CP00 [0]
PPID -- US0WGHX2779513AG00T
PPID Rev -- X00
Service Tag -- 6NHW6Z1
Part Number -- 7520072402
Part Number Revision -- H
SW Version -- 9.2(1.0B2)
Available free memory: 2,231,607,296 bytes
LEVEL 0 DIAGNOSTIC
eepromTest .................................................. PASS
Starting test: fabricAccessTest ......
+ Access Test for BCM unit 0 : PASSED
+ Access Test for BCM unit 1 : PASSED
+ Access Test for BCM unit 2 : PASSED
+ Access Test for BCM unit 3 : PASSED
+ Access Test for BCM unit 4 : PASSED
+ Access Test for BCM unit 5 : PASSED
fabricAccessTest ............................................ PASS
Starting test: fabricBoardRevisionTest ......
Fabric Board 0 Version = 0x1
Fabric Board 1 Version = 0x1
fabricBoardRevisionTest ..................................... PASS
fabricIdTest ................................................ PASS
fabricPllStatusTest ......................................... PASS
Starting test: fanTest ......
+Fan tray[0] Sanity test PASS
+Fan tray[1] Sanity test PASS
+Fan tray[2] Sanity test PASS
+Fan tray[3] Sanity test PASS
+Fan tray[4] Sanity test PASS
fanTest ..................................................... PASS
Starting test: fpgaTest ......
WARNING: FPGA Version must be at least 0x1a to access the status, boot status
and device id registers
fpgaTest .................................................... PASS
i2cTest ..................................................... PASS
macPhyRegTest ............................................... PASS
Starting test: pcieScanTest ......
39 PCI devices installed out of 39
pcieScanTest ................................................ PASS
Starting test: psuTest ......
PSU[0] sensor[0] temperature 37.0 C
PSU[0] sensor[1] temperature 30.0 C
PSU[0] sensor[2] temperature 25.0 C
+PSU[0] test PASS
PSU[1] sensor[0] temperature 32.0 C
PSU[1] sensor[1] temperature 29.0 C
PSU[1] sensor[2] temperature 23.0 C
+PSU[1] test PASS
PSU[2] sensor[0] temperature 32.0 C
PSU[2] sensor[1] temperature 30.0 C
Debugging and Diagnostics
297