Filter
Top Products
DELL DIAGNOSTICS-Z9500-CP00 [0]
PPID -- NA
PPID Rev -- NA
Service Tag -- NA
Part Number -- NA
Part Number Revision -- NA
SW Version -- 9.2(1.0B2)
Available free memory: 2,646,888,448 bytes
LEVEL 0 DIAGNOSTIC
eepromTest .................................................. PASS
i2cTest ..................................................... PASS
macPhyRegTest ............................................... PASS
Starting test: pcieScanTest ......
22 PCI devices installed out of 22
pcieScanTest ................................................ PASS
portcardBcmIdTest ........................................... PASS
Starting test: portcardBoardRevisionTest ......
+ Access Test for BCM unit 0 : PASSED
+ Access Test for BCM unit 1 : PASSED
+ Access Test for BCM unit 2 : PASSED
portcardBoardRevisionTest ................................... PASS
qsfpOpticsTest .............................................. PASS
qsfpPhyTest ................................................. PASS
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
Starting test: temperatureTest ......
Thermal Monitor Diodes:
Diode[0] temperature 33.9 C
Diode[1] temperature 35.0 C
Diode[2] temperature 35.0 C
Diode[4] temperature 34.5 C
Port card[0]:
Average temperature 38.3 C, maximum 41.1 C
Port card[1]:
Average temperature 40.5 C, maximum 43.3 C
Port card[2]:
Average temperature 42.8 C, maximum 44.9 C
Ethernet MAC temperature 45.0 C
temperatureTest ............................................. PASS
LEVEL 1 DIAGNOSTIC
eepromTest .................................................. PASS
i2cTest ..................................................... PASS
macPhyRegTest ............................................... PASS
Starting test: partyLinkStatusTest ......
WM0 Link Status UP
partyLinkStatusTest ......................................... PASS
Starting test: portcardHiGigLinkStatusTest ......
+ HG Link Status Test for Unit 0 (Portcard 0): PASSED
+ HG Link Status Test for Unit 1 (Portcard 1): PASSED
+ HG Link Status Test for Unit 2 (Portcard 2): PASSED
portcardHiGigLinkStatusTest ................................. PASS
Starting test: portcardXELinkStatusTest ......
+ XE Link Status Test for unit 0 (Portcard 0): PASSED
+ XE Link Status Test for unit 1 (Portcard 1): PASSED
300
Debugging and Diagnostics