Filter
Top Products
Figure 132. VRRP for an IPv6 Configuration
NOTE: In a VRRP or VRRPv3 group, if two routers come up with the same priority and another
router already has MASTER status, the router with master status continues to be MASTER even if one
of two routers has a higher IP or IPv6 address.
Example of Configuring VRRP for IPv6 Router 2 and Router 3
Configure a virtual link local (fe80) address for each VRRPv3 group created for an interface. The VRRPv3
group becomes active as soon as you configure the link local address. Afterward, you can configure the
group’s virtual IPv6 address.
The virtual IPv6 address you configure must be the same as the IPv6 subnet to which the interface
belongs.
1016
Virtual Router Redundancy Protocol (VRRP)